4772 - Octagon System 4772 CPU Board - The 6020 PC microcontroller...
- Part Number:
- 4772
- Model Number:
- 4772
- Make:
- OCTAGON SYSTEM
- Lead Time:
- Available
- Qty In Stock:
- Available
Octagon System 4772 CPU Board - The 6020 PC microcontroller is a 386–powered SBC with the essential I/O functions for embedded applications. Simple Type: CPU Board
The 6020 PC microcontroller is a 386–powered Micro PC computer with the essential I/O functions for embedded applications. It integrates serial ports, digital I/O, LPT1 and floppy drive (through LPT1) into a single card. The 6020 is ideal for applications in transportation, security, military, communications, distributed control, point–of–sale, ticketing machines, weighing equipment, and other similar applications. The low–power requirements make it suitable for situations where battery life or heat dissipation is a concern. The digital I/O lines are TTL compatible. These lines will interface with logic devices, switch inputs, LEDs, and industry–standard opto module racks. The lines are grouped into six ports of eight lines each. All lines can be individually programmed as inputs or outputs.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- None Available
Specifications
- CONNECTORS: Two 26–pin headers for digital I/O; optional termination board provides access for field wiring 10–pin connector for each COM port; Octagon cable provides standard DB–9 interface, 2–pin connector for power, 4–pin connector for AT battery, Auxiliary I/O connector is 34–pin header; an optional breakout board provides LPT1, keyboard, and AT battery through this connector
- DIGITAL I/O: 48 dedicated digital I/O lines; 17 additional digital, I/O lines accessed through LPT1, Dedicated digital I/O lines can sink or source 15 mA, Pull up / pull down 10K resistors configure lines in groups of eight.
- DRIVES: Solid–state disk 0 (SSD0), 1 MB flash contains software, with 512 KB available to user; appears as hard drive to system, Solid–state disk 2 (SSD2), 128 KB SRAM for data storage with battery backup; appears as hard drive to system Floppy interface through LPT1
- ENVIRONMENTAL: AT battery port for real time clock (no battery necessary for operation), Size: 4.5” x 4.9”, Micro PC form factor, Power: 5V ±0.25V @ 1.0A maximum; full 40 MHz, operation 670 mA typical, suspend mode 245 mA typical, –40° to +85° C operating range at 25 MHz, 0° to +60° C operating range at 40 MHz, Relative humidity 5 to 95%, noncondensing
- MOUNTING: Micro PC card cage or ISA expansion bus, Panel mounted with standoffs
- Processor: ALi M6117 386SX
- SERIAL I/O: Two eight–wire serial ports, 16C550 compatible, RS–232, 16–byte FIFO buffered, ESD protected; RS–422 and RS–485 available on COM2 with use of network interface module (NIM)
- SYSTEM: ALi M6117 386SX, 40 MHz clock speed, jumperable to 25 MHz, PC–compatible DMA, controllers, interrupt controllers, and timers, Datalight ROM–DOS 6.22 in ROM, Phoenix BIOS with industrial extensions, 2 MB surface–mount fast page DRAM, Interrupt routing for flexibility, 768 words available in serial EEPROM for user, Watchdog timer with 1.6 seconds timeout, software controlled, Power management, for battery–operated
- USER INTERFACE: CRT through Micro PC expansion card, PS/2 keyboard (requires custom cable or breakout board), Speaker port, Serial console through COM1 to host computer
Applications
- None Available
Aliases
- None Available